£7.75 delivery on orders excluding certain products & postcodes *
Nullifire SC902 Intumescent Steel Coating provides a fast cure, off white, matt finish for intumescent fire protection on internal structural steel. This product is for professional use only by approved contractors. If you would like training or further information, contact our technical team on 01462 421333.
Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the datasheets found on the technical tab.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Please contact our technical team prior to discuss your requirements in regards fire protection internally.
Components: | Two Part |
Type: | Intumescent |
Finish: | Matt |
Stock Colours: | Off White |
Tintable: | No |
VOC Content: | 137.0g per Litre |
Volume Solids: | 85% |
Suitable Substrates: | For structural steel |
Application Method: | Graco Mark V or equivilient |
Theoretical Coverage: | 1.75 Kg per m2 based on 1.0mm DFT |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | 60 minutes at 20°C |
Touch Dry: | - |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | Clean with Nullifire FC150. Do not thin. |
Shelf Life: | 9 months in original unopened packaging |
Packaging: | Available in 25 Kg |