Due to the closure of 3M Northallerton, this product is now discontinued. Please contact our technical team for a suitable alternative.
3M Scotchkote Epoxy Floor Coating HB 850 is a high build, ceramic enhanced, 100% solids floor coating
3M Scotchkote Epoxy Floor Coating HB 850 is a high build, ceramic enhanced, 100% solids floor coating. This product provides an excellent high performance finish, as well as a high resistance to abrasion, mechanical damage and chemical damage. 3M Scotchkote Epoxy Floor Coating HB 850 is suitable for a wide range of floor surfaces, such as concrete, power floated concrete and steel. It is utilised as part of the Police Custody Suite Specification, demonstrating the high quality created from this product.
3M Scotchkote Epoxy Floor Coating HB 850 can be used on a wide range of floor surfaces, and is therefore suitable for numerous amounts of locations. The product is V.O.C. free and has a high resistance level, standing strong against abrasions, mechanical damage and chemical damage.
3M Scotchkote Epoxy Floor Coating HB 850 is best applied with the use of a roller (especially when applying a slip resistant finish), but can also be applied using a brush. When a slip resistant finish is required, the product should be used in conjunction with 3M Scotchkote Granular Aggregate LD 092 or HD 091. The product can be used for up to 45 minutes, and will dry to the touch in 6 hours. 3M Scotchkote Epoxy Floor Coating HB 850 is available in both 5 litre and 20 litre units, with a theoretical coverage rate of 5m2, per litre, at 200 microns dft.
Surface and Environment
3M Scotchkote Epoxy Floor Coating HB 850 is suitable for a number of different surfaces, such as concrete, quarry tiles and steel. Any surfaces that this product is applied to should be clean, dry and free from any loose material, in order to obtain the best results possible. This product provides excellent adhesion, and will provide a high quality service due to the durability and resistant nature of the product.
- Ceramic enhanced
- Abrasive and mechanical resistant
- Excellent chemical resistance
- V.O.C. free
- Excellent adhesion
- Part of the Police Custody Suite Specification
- Specifically developed as a 100% solids protection system for application to a wide range of floor surfaces
- The product should be applied to give a smooth uniform coating by brush or roller with roller being the preferred method particularly for the application of slip resistant finishes
- Where a slip resistant finish is required then 3M Scotchkote Granular Aggregate LD 092 or HD 091 should be scattered on to the product and rolled in
- Designed for application by brush or roller
- Useable life 45 mins
- Touch Dry 6 hours
- Theoretical Coverage Rate 5 sq metre per litre at 200 microns dft.
- Supplied in 5 litre & 20 litre packs
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.