Due to the closure of 3M Northallerton, this product is now discontinued. Please contact our technical team for a suitable alternative on 01462 421333.
Scotchkote Urethane Coating UV 840 is Section 12 and RT98 approved
Scotchkote Urethane Coating UV 840 is specifically developed to be used as a final coat in a 3M coating system. It leaves a durable glossy finish which will assist the easy removal of any subsequent graffiti.
Scotchkote Urethane Coating UV 840 is best used in the construction and transport industries, where the occurrence of graffiti, abrasion and mechanical damage are commonplace. Once fully cured, Scotchkote Urethane Coating UV 840 resists aqueous solutions, oils, fats and a wide range of industrial chemicals. This coating is especially useful in the rail industry for applications on surfaces such as locomotive exteriors.
Scotchkote Urethane Coating UV 840 can be applied using a brush, roller or an airless spray and provides excellent adhesion on correctly prepared and primed surfaces.
Surface and Environment
Scotchkote Urethane Coating UV 840 is a solvent based primer suitable for use on correctly prepared surfaces, in environments where high levels of mechanical and chemical damage are an issue. This coating is also suitable for surfaces in areas where removal of graffiti is necessary.
- Solvent based
- Can be thinned with Scotchkote Thinners PU71
- Apply by brush roller or airless spray
- Theoretical coverage 13.75m2 per litre
- Available in 4 and 20 litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.