This product is now discontinued. Please see Sherwin Williams Firetex M71V2 as a potential alternative.
Sherwin Williams Firetex M71V3 Sheen Topcoat is a sheen decorative topcoat for FIRETEX FX5120 providing protection when used in internal semicontrolled conditions where condensation may occur (Category C2 as defined in ISO 12944-2).
Recommended application via airless spray, brush, conventional spray or roller. Recommended cleanser no5. A topcoat is not normally required, but indefinitely overcoatable with itself. FIRETEX M71V3 must always be applied to a minimum dry film thickness of 50 microns to provide adequate protection to FIRETEX FX5120 in an internally semi-controlled environment where condensation may occur (Category C2 as defi ned in ISO 12944-2).
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Forumulated to meet the requirements of EC directive 2004/42/CE
- Drying Times: 45 minutes at 15°C to touch, 8 hours at 15°C to recoat
- Dry Film Thickness: 50 microns minimum
- Theoretical Coverage: 10m2 per litre
- Available in a full range of colours
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.