This product has been discontinued. Please contact us for an alternative.
PPG Sigma PU 162 Miocoat can be used indoors or outdoors, when exposed to weather conditions and provides excellent adhesion to galvanised steel and aluminium, offering long term anti corrosion protection.
PPG Sigma PU 162 MIO is a single component moisture curing micaceous iron oxide primer and build coat. Designed for quick application straight out the container, and is ideal for use in maintenance situations.
PPG Sigma PU 162 MIO can be used in an industrial environment, internally or externally that be applied and cured even at low temperatures. Sigma PU 160 Primer produces a smooth, flat finish, with a grey result, however others colours can be made available on special request.
PPG Sigma PU 162 MIO can be applied using brush, roller or airless spray and has a theoretical coverage rate of 14m2 per litre. After 2 hours you will be left with a touch dry surface that can be overcoated after just 4 hours.
Surface and Environment
PPG Sigma PU 162 MIO is suitable for use indoors or outdoors, when exposed to weather conditions and provides excellent adhesion to galvanised steel and aluminium, offering long term anti corrosion protection.
- PPG Sigma PU 162 MIO is a one component moisture curing micaceous iron oxide containing primer/build coat.
- Low temperature cure
- Good anticorrosive properties
- Excellent adhesion to galvanised steel and aluminium
- Ready for use
- MIO primer/build coat for maintenance situations
- Theoretical spreading rate 14.2 m2 per litre for 50 microns, 9 m2 per litre at 80 microns
- Touch dry after 2 hours
- Overcoating interval min. 4 hours
- Full cure after 3 days.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.