This product is now discontinued. Please contact us for an alternative.
SigmaShield 420 is a two component reinforced high solids polyamide adduct cured epoxy coating designed for use on cargo tanks of bulk or oil carriers and storage tanks.
SigmaShield 420 can be used as a build coat for underwater and boot top systems and offers a high level of resistance to seawater while offering outstanding resistance to abrasion and impact.
SigmaShield 420 can be applied using brush, roller or airless and air spray and is touch dry in 3 hours. After 10 hours you will be able to apply a second coating that leaves you with a high performance epoxy coating with a red brown or grey finish.
Surface and Environment
SigmaShield 420 is highly suited for use in atmospheric conditions on substrates that require abrasion and impact resistance. SigmaShield 420 can be applied to all surfaces that have been previously coated with Sigmacover 280 or 220.
- Two component reinforced high solids polyamine adduct cured epoxy coating.
- Coating for cargo tanks of bulk- or oil carriers and storage tanks.
- Build coat for underwater- and boot top systems.
- Excellent abrasion and impact resistance.
- Outstanding (sea)water resistance.
- Easy to clean.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.