£7.75 delivery on orders excluding certain products & postcodes *
Sikafloor 405 is a single pack elastomeric pigmented floor paint that is moisture triggered. This polyurethane resin coating is UV resistant, and crack bridging, as well as non-yellowing and has been formulated for concrete floor slabs, cementitious screeds and tiles.
Sikafloor 405 has been developed as a slip resistant waterproof coating that is also water vapour preamble to cope with light to medium mechanical exposure making it ideally suited for use on balconies, footbridges, stairways, terraces, and galleries. Sikafloor 405 is slip resistant, UV resistant, waterproof, crack-bridging coating for concrete, cementitious screed substrates and tiles. This product is ideal for light to medium mechanical exposure or for balconies, terraces, footbridges, stairways, galleries etc.
Sika® Balcony Premium System
Primer: 1 x Sika® Bonding Primer
Waterproofing:
First coat: 1 x Sikafloor®-405
Membrane: Sika® Reemat Premium
Second coat: 1 x Sikafloor®-420
The waterproofing system build up must always be over coated with the following finishing system chosen according to the mechanical resistance and the aesthetical aspect
Finish: Quartz
Primer: Sikafloor®-406
Wear course: Screed made of Sikafloor®-406 and Sikafloor®-Quartz Sand KG 7, e.g Graffito (0.6 – 1.2 mm) applied fresh in fresh
Top Coat: 1 x Sikafloor®-420
Finish: Solid
Wear course: 1 x Sikafloor®-405 fully broadcasted with Sikafloor®-Quartz Sand KG 8*, e.g Grey (0.3-0.8 mm)
Seal Coat: 1 x Sikafloor®-420
Finish: Deco +
Wear course: 1 x Sikafloor®-405 broadcasted in excess with Sikafloor-Colour Chips Mix, e.g. Gobi
Top Coat: 1 x Sikafloor®-420
Finish: Deco
Wear course: 1 x Sikafloor®-405 broadcasted slightly with coloured flakes
Top Coat: 1 x Sikafloor®-420 + Sikafloor® Anti Slip Agent
Finish: Uni
Top Coat: 1 x Sikafloor®-420 + Sikafloor® Anti Slip Agent
The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. Old coating and tiles have to be solid, adherent and free of layers detrimental to adhesion. Existing layer has to be cleaned and mechanically roughened. A test area has to be applied.
Concrete substrates must be prepared mechanically using abrasive blast cleaning or grinding equipment to remove cement laitance and achieve an open textured
surface. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor®, SikaDur® and SikaGard® range of materials. The concrete or screed substrate has to be primed or levelled in order to achieve an even surface. High spots must be removed by e.g. grinding. Solid and good adherent tiles must be grinded and then levelled with a scratch coat of Sikafloor®-156 / -161 before applying the chosen Sika Balcony System. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum.
Prior slightly stir Sikafloor®-405 mechanically before using. Prior to application, confirm substrate moisture content, r.h. and dew point.
Primer: Apply Sika® Bonding Primer by brush or short pile roller.
Coating: Apply first coat Sikafloor®-420 (preferably RAL 7015, minimum 1.1 litre per m2)by long pile paint roller. A brush is only for little applications, local details and reinforcement suitable. Embed Sika® Reemat Premium glass fibre mat in this wet coat. Apply second coat Sikafloor®-405, minimum 0.5 litre per m2 finishing coat, after the first coat is dry. Minimum dry film thickness Sikafloor®-405,with Sika Reemat Premium : 1400 μm; For an additional partial reinforcement under Sika Reemat Premium please use Sika Flexitape Heavy Duty.
Components: | One Part |
Type: | Moisture triggered curing polyurethane resin |
Finish: | |
Stock Colours: | RAL 1015, RAL 7015, RAL 7032, RAL 7035, RAL 7042 |
Tintable: | No |
VOC Content: | <500.0g per Litre |
Volume Solids: | 70.9% |
Suitable Substrates: | For concrete, cementitious screed substrates and tiles |
Application Method: | Long pile paint roller. A brush is only suitable for small applications, local details and reinforcement. |
Theoretical Coverage: | Dependant on System |
Wet Film Thickness (WFT): | Dependant on System |
Dry Film Thickness (DFT): | Dependant on System |
Induction Time: | - |
Pot Life: | The material in opened containers should be applied immediately. With open containers surface film formation will happen within approx. 24 hours. High temperatures and high air humidity will accelerate curing significantly. |
Touch Dry: | 2 hours at 20°C |
Overcoatable: |
Before applying Sikafloor®-405 on Sika®-Bonding Primer allow ~ 2.5 - 3.5 hours at 20°C Before applying Sikafloor®-405 on Sikafloor®-405 allow between 18 hours and 7 days at 20°C |
Fully Cured: | - |
Cleaner / Thinner: | - |
Shelf Life: | 6 months from date of production if stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between 0°C and +25°C.Higher temperatures reduce the shelf life. |
Packaging: | Available in 5 and 15 Litres |