Please note this product is now discontinued. Please see Teamac C259 Protector as a potential alternative.
Teamac Tropical Killa Anti-fouling Boat (Marine) Paint is an economical copper based anti fouling coating for wooden, metal and fibreglass boats and is suitable for boat speeds up to 25 - 30 knots maximum.
Teamac Tropical Killa Antifouling Boat (Marine) Paint is an economical copper based anti fouling coating for wooden, metal and fibreglass boats. Anti foul provides a scrubbable surface for seasonal protection. Suitable for domestic and commercial vessels with steel, wood, or glass fibre (GRP) hulls. Anti fouling Boat Paint discourages the growth of barnacles, weed, and other water life on the submersed hull of your boat or underwater structures.
PROMAIN ARE DELIGHTED TO MAKE A DONATION TO THE ROYAL NATIONAL LIFEBOAT INSTITUTION FOR EVERY TIN OF TEAMAC TROPICAL KILLA ANTI FOUL PAINT ORDERED THROUGH US.
Teamac Tropical Killa Anti-fouling Paint is a modified resin/chlorinated rubber based composition containing cuprous oxide best used on steel, wood or glass fibre boat and yacht surfaces. Tropical Killa Anti foul is suitable for boat speeds of up to 30 knots maximum and is available in black, blue and red.
Teamac Tropical Killa should be applied by brush, roller or spray. It is recommended that professional users use spray for a smarter finish. After 2 hours the surface will be touch dry and ready for recoating after a minimum of 16 hours. Once applied, Tropical Killa will produce a semi-gloss finish in either black, blue or red. The theoretical coverage rate of Tropical Killa is 10m2 per litre.
Teamac Tropical Killa is an anti fouling paint designed for use on wood, steel or fibreglass boat hulls in Marine based environment. Surfaces should be primed with 2 coats of Metaclor Underwater Primer when painting metal or wood before Tropical Killa is applied.
- A modified resin / chlorinated rubber based composition containing cuprous oxide
- Suitable for steel, wood or glassfibre boat and yacht surfaces
- Suitable for boat speeds up to 25 - 30 knots maximum
- Prime with 2 coats of Metaclor Underwater Primer on Metal and Wood (not required on GRP)
|Stock Colours:||Red, Black and Blue|
|VOC Content:||402.0g per Litre|
|Suitable Substrates:||For vessels with a max speed of 20 knots. Suitable for domestic and commercial vessels with steel, wood, or GRP hulls. Do not use on Aluminium vessels.|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||10 m2 per litre at 50 microns (based on brush or roller application|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Cleaner / Thinner:||Teamac Thinner 17|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5, 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.