Centrecoat Elastomeric Solar Reflective Roof Coating

SKU
id10100
Non Hazardous
A silver water based solar reflective paint offers up to 400% elasticity which helps reduce cracking.
Available in 4 and 20 Litres
From £59.42 £49.52
In stock
Only %1 left
Product Description

Centrecoat Elastomeric Solar Reflective Roof Coating prevents the surface from warming up whilst remaining water vapour permeable.

Centrecoat Elastomeric Solar Reflective Roof Coating is a water based Solar Reflective Paint best used in areas where UV light and weathering is of a concern. With a reflective surface created Centrecoat Elastomeric Solar Reflective Roof Coating prevents the surface from warming up whilst remaining water vapour permeable.

Best Uses

Centrecoat Elastomeric Solar Reflective Roof Coating can be can be applied to metal roofs and most bituminous products such as roofing felt and offers up to 400% elasticity which helps reduce cracking. A further benefit offered is that this product can be applied to a damp surface making it ideal for application in Spring and Autumn as well as Summer.

Application

The substrate must be clean, free from peeling, dust and dirt. Bridge cracks and fissures with Rust-Oleum Dacfill Mesh. Fill up joints with Rust-Oleum Elastofill. Very porous substrates have to be primed first with Rust-Oleum Primer 44HSCentrecoat Elastomeric Solar Reflective Roof Coating can be directly applied on metals (except new galvanised steel), roofing and most bituminous products (> 1 year). Centrecoat Elastomeric Solar Reflective Roof Coating can be applied without any problem on most waterbased products like Rust-Oleum Dacfill and Rust-Oleum Noxyde.

Technical Details

Features

  • Ready to use Water Based Solar Reflective aluminium coating for decoration and lasting protection of roofs
  • Can be applied to metal roofs and most bituminous products and offers up to 400% elasticity which helps reduce cracking
  • This solar reflective coating is easy to apply by brush or roller, and can be used on all types of roofs with minimal slope (minimum 1%)
  • Can be applied to a damp surface
  • It creates a long lasting heat reflecting, elastic rubber-like layer without seams or joints
  • Can be applied over 3M Polynox

Technical Info

Components: One Part
Type: Water Based
Finish: Metallic
Stock Colours: Aluminium
Tintable: No
VOC Content: 70.0g per Litre
Volume Solids: 48%
Suitable Substrates: For roofs with solar reflective characteristics
Application Method: Brush, Mohair Roller or Airless Spray
Theoretical Coverage: Waterproofing: 1 - 1.5 Litres per m2 (depending on type of roof) as a second coat on Dacfill.
Aesthetical: 0.3 - 0.5 Litres per m2
Wet Film Thickness (WFT): 1000 microns
Dry Film Thickness (DFT): 480 microns
Induction Time: -
Pot Life: -
Touch Dry: 4 hours at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Do not dilute
Shelf Life: 1 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 4 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use