Please note, this product is now discontinued. Please contact our technical team for a suitable alternative.
Sherwin Williams Envoy TF500 - Formerly Leighs is a tin free ablative anti-fouling based on a high performance polymeric resin system for the protection.
Sherwin Williams Envoy TF500 is formulated to provide protection against a wide range of grass and shell fouling where the use of tin-based biocides is precluded. Specifications utilising this product may be varied to provide the most cost effective system to meet operating conditions and service requirements. Compatible with an extensive range of existing bottom systems.
Use Sherwin Williams M535 Vinyl Primer Tiecoat as primer. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Previous anti-fouling surfaces should be thoroughly high pressure washed and allowed to dry out. Damaged coatings should be re-prepared by spot blasting or power cleaning, and touched-up with anti-corrosive primer before anti-fouling. Where conversion of a bottom from a high performance system to ablative is required it may be necessary to apply an overall coat of compatible sealer.
An addition of 5% Sherwin Williams Cleanser Thinner No.5 is necessary, before brush application can commence, even then it is only suitable for application to small areas. Recommended application methods are via airless spray, roller or for small areas and touch up via brush. Indefinitely self overcoatable. Recommended cleanser thinner No5 for brush and roller application, or Sherwin Williams Thinner No9 for spray application.
- FEPA approved - HSE No. 7639
- Approved by MoD/DRA AFS No.2293
- IMO Antifouling Convention Compliant (AFS/CONF/26)
- Lloyds Certificate Ref: MMDE/2006/2217
- Dry Film Thickness: 75 microns
- Theoretical Coverage: 8.4m2 per litre
- Drying Time: 45mins at 15°C to touch, 8 hours at 15°C to recoat
- Available in Off White, Red, Brown, Dark Blue and Black
- Available in 15 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.