Rustoleum EpoxyShield Fine Crack Filler (formerly Anglo Epoxy Crack Filler) is a product used to quickly repair the finest of cracks of up to 3mm wide.
Rustoleum EpoxyShield Fine Crack Filler (formerly Anglo Epoxy Crack Filler) is a product used to quickly repair the finest of cracks of up to 3mm wide. Rustoleum EpoxyShield Fine Crack Filler is part of our excellent range of Concrete Repair products designed for use on Floors and some vertical substrates.
Rustoleum EpoxyShield Fine Crack Filler is a 2 part, liquid epoxy, repair product, ideally used on floors and for repairing small cracks of up to 3mm wide. Available in 500ml tins.
Rustoleum EpoxyShield Fine Crack Filler is easy to apply and is full dry in 4 hours ready for a recoating. Rustoleum EpoxyShield Fine Crack Filler comes in 500ml containers and is designed for filling 25 metres of cracks at 2mm wide and 10mm deep.
Surface and Environment
Rustoleum EpoxyShield Fine Crack Filler is designed for use on concrete surfaces where small cracks appear. Use Rustoleum EpoxyShield Fine Crack Filler on flooring thats been damaged, to revitalise it and give it a new appearance when an overcoating is applied. Rustoleum EpoxyShield Fine Crack Filler can be used internally or externally for the quick repair of cracks and holes.
- Formerly Anglo Epoxy Crack Filler
- EpoxyShield Fine Crack Filler
- Quick repair of fine crack and holes
- 2-part liquid Epoxy
- EpoxyShield Fine Crack Filler is for repairing fine cracks up to 3 mm wide
- Solvent-free formula
- Dry in 3-4 hours (at 20 Degrees C.)
- Use EpoxyShield Fine Crack Filler to recoat after 4 hours (at 20 Degrees C.)
- Use 500 ml for 25 metres (2 mm wide, 5 mm deep)
- FREE plastic scraper included
- Available in 500ml tins.
|Type:||Liquid Crack Filler|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For concrete|
|Application Method:||Plastic Scraper|
|Theoretical Coverage:||A package of 500 ml fills a crack of 2 mm wide and 5 mm deep over approximately 25 linear metres (be aware of the fact that cracks can vary in depth and width). The coverage as mentioned here is therefore only a guideline/estimate.|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||20 - 30 minutes at 20°C|
|Overcoatable:||3 - 4 hours at 20°C (curing time will be extended by low temperatures)|
|Cleaner / Thinner:||-|
|Shelf Life:||1 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 500ml|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.