Rustoleum Fassicoat Primer and Top Coat for Wood

SKU
id3596
UN1263 (Class: 3, Pk Grp: III)
Rustoleum Fassicoat primer and top-coat for interior and exterior wood and metal.
Available in 2.5 Litres. Tintable to over 30,000 colours
From £37.54 £31.28
In stock
Only %1 left
Product Description

Rustoleum Fassicoat Primer and Top Coat Paint for Wood is a solvent based, single component system based on soya alkyd resins, designed for use on woodwork.

Rustoleum Fassicoat Primer and Top Coat for Wood is a primer and topcoat all in one, and is part of our brilliant range of exterior paints that offer decorative and protective qualities.

Best Uses

Rustoleum Fassicoat Primer and Top Coat for Wood has been specifically designed for use on wooden structures and substrates and works best when applied to these. Rustoleum Fassicoat Primer and Top Coat can also be applied to metal substrates to offer excellent weather resistance.

Application

Rustoleum Fassicoat Primer and Top Coat Paint for Wood is designed for exterior application and can be applied using a flat brush or roller. Rustoleum Fassicoat Primer and Top Coat for Wood is dry to touch in 3-4 hours, ready to recoat after 24 hours and offers a theoretical coverage rate of 10-15m2 per litre.

Surface and Environment

Rustoleum Fassicoat Primer and Top Coat for Wood is a moisture regulating paint that works well in exterior environments to produce a satin gloss finish that protects against weather and decorates wooden substrates. Rustoleum Fassicoat Primer and Top Coat for Wood can be tinted to a range of different colours on request.

Technical Details

Notes

  • Fast drying solvent based primer and top-coat

Technical Info

Components: Single Pack
Type: Moisture Regulating Paint
Finish: Satin Gloss
Stock Colours: Just tints
Tintable: Yes. Please note, bespoke tints are non fundable / exchangeable
VOC Content: 300 g/l
Volume Solids: 51 - 56 % (weiss)
Suitable Substrates: Wood and Metal
Application Method: Brush, Roller, Airless Spray or Air-Atomised Spray
Theoretical Coverage: 10 - 15 m²/l
Wet Film Thickness (WFT): 100 ùm
Dry Film Thickness (DFT): 55 μm
Induction Time: -
Pot Life: -
Touch Dry: 3-4 hours at 20°C
Overcoatable: 24 hours 20°C
Fully Cured: 1 week at 20°C
Cleaner / Thinner: White spirit or Thinner 22
Shelf Life: 5 years
Packaging: Available in 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use