£7.75 delivery on orders excluding certain products & postcodes *
Nullifire SC804 is a formulated for use within a system to protect structural steel against the effects of fire up to 120 minutes. This coating can be topcoated with recommended topcoats for decorative and durability purposes.
Once your DFT has been achieved as specified, the following top seals can be applied
Apply using airless spray equipment to the guidelines as provided by Promain's technical team. Do not thin. Ensure the steel is dry and free from contact with rain or condensation during application and drying. Only apply with air and steel temperatures above 5C. Apply to a clean, undamaged and dry primed surface.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Components: | Single Pack |
Type: | Water Based Intumescent |
Finish: | Smooth Matt |
Stock Colours: | White |
Tintable: | No |
VOC Content: | Ultra Low |
Volume Solids: | 69% |
Suitable Substrates: | Internal Structural Steel |
Application Method: | Airless Spray |
Theoretical Coverage: | 1 Kg per m2 based on 0.5mm DFT |
Wet Film Thickness (WFT): | Dependant on Requirements |
Dry Film Thickness (DFT): | Dependant on Requirements |
Induction Time: | - |
Pot Life: | - |
Surface Dry: | Dependant on Requirements |
Overcoatable: | Dependant on Requirements |
Fully Cured: | Dependant on Requirements |
Cleaner / Thinner: | Water |
Shelf Life: | 6 months when stored as recommended in original unopened container |
Packaging: | Available in 25 Kg |