PPG Steelguard 851

PPG Steelguard 851 is a single component thin film solvent borne intumescent coating for the cellulosic fire protection up to 120 minutes on structural steelwork.

Best Uses

PPG Steelguard 851 provides up to 120 minutes protection from cellulosic fires and also benefits from being fast-drying, providing short handling times on both off-site or on-site applications. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required. Weather resistant up to 12 months without topcoat provided the coating has been applied in accordance with INFORMATION SHEET 1222 and is not subject to running or pooling water, high humidity or immersion conditions

Application

Approved primer must be sound, dry and free from any contamination. Stir thoroughly until homogeneous and free from lumps. Apply with airless spray or brush / roller for touch up or repair only. Refer to data sheets for full instructions.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.