Sherwin Williams Firetex M95 - Formerly Leighs

SKU id9218 Part A: UN1263 (Class: 3, Pk Grp: II), Part B: UN3082 (Class: 9, Pk Grp: III)
A durable, 2 pack epoxy intumescent coating suitable for cellulosic fire protection to blast cleaned steel.
Available in 15 Litres
£128.16 (£153.79 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£128.16 (£153.79 Inc VAT)

Product Description

Sherwin Williams Firetex M95 - Formerly Leighs is a durable, 2 pack epoxy intumescent coating suitable for cellulosic fire protection to blast cleaned steel.

Best Uses

An exterior durable intumescent, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site, provided the conditions listed below are adhered to. After application, unless a sealer coat is applied prior to exposure, the coating must be protected from the weather until the material reaches a shore D hardness of 50 in order to become exterior durable. Applications below 15°C may result in insuffi cient curing and reduced weather resistance and performance. See application conditions and overcoating.

Application

Recommended primers: Macropoxy L574 Blast Primer, Macropoxy C425V2 Zinc Phosphate Primer, Macropoxy C400 Range, Macropoxy M111 Wet Blast Primer or FIRETEX C69 Fast-Track Blast Primer.

Recommended application method via airless spray or trowel for small areas or touch up only. Do not thin. Indefinitely overcoatable with high performance systems provided the surfaces to be coated are free from all contaminants.

Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. FIRETEX M95 is indefinitely overcoatable with itself.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3

Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

£71.00 (£85.20 Inc VAT)
Sherwin Williams Kem-Kromik 671 - Formerly Leighs M671

Sherwin Williams Kem-Kromik 671 - Formerly Leighs M671

A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.

£52.00 (£62.40 Inc VAT)
Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is prec...

£91.49 (£109.79 Inc VAT)
Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard

Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

£62.50 (£75.00 Inc VAT)
Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip

Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

£97.00 (£116.40 Inc VAT)
Sherwin Williams Cleanser Thinner No 1

Sherwin Williams Cleanser Thinner No 1

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

£28.85 (£34.62 Inc VAT)
Centrecoat WFT Wet Film Thickness Comb Gauge

Centrecoat WFT Wet Film Thickness Comb Gauge

An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are a...

£3.99 (£4.79 Inc VAT)