£7.75 delivery on orders excluding certain products & postcodes *
FIRETEX FX13381/2 is designed for in-shop application by airless spray, to provide fire resistance for up to 120 minutes on structural steel. For use without topcoat in dry internal areas - category Z2 as defined in ETAG 018-2. For use with topcoat in internal areas with high humidity, semi exposed areas and in fully exposed areas - categories Z1, X and Y as defined in ETAG 018-2.
Recommended application via airless spray. For in-shop application, use FIRETEX C69 Fast-Track Blast Primer. For certain dry, internal situations where the final colour/appearance is not critical, then FIRETEX FX13381/2 may remain un-topcoated. For externally exposed steelwork and severe internal environments Acrolon C137V2 or Acrolon C237 must be used as a topcoat.
For other internal environments where a topcoat is required then FIRETEX M71V2 or Sher-Cryl M770 should be used. In all instances for subsequent re-decoration, use FIRETEX M71V2, Acrolon C137V2 or Acrolon C237 as appropriate
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Components: | Single Pack |
Type: | Solvent Based Intumescent |
Finish: | - |
Stock Colours: | White |
Tintable: | No |
VOC Content: | 272 gms/litre |
Volume Solids: | 75± 4% |
Suitable Substrates: | Structural Steel |
Application Method: | Airless Spray |
Theoretical Coverage: | See separate sheet of FX13381/2 loading requirements |
Wet Film Thickness (WFT): | 1867 microns |
Dry Film Thickness (DFT): | 1400 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 30 minutes at 15°C |
Overcoatable: | 4 hours at 15°C |
Fully Cured: | - |
Cleaner/Thinner: | Cleanser/Thinner: No 2 (for thinning) |
Shelf Life: | 2 years from date of production unopened or 'use by' date where specified |
Packaging: | Available in 20 Litres |