Sherwin Williams Firetex FX5062 is a water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
FIRETEX FX5062 is designed for application by airless spray to provide fire resistance for periods of up to 90 minutes on structural steel. For use in internal dry controlled environments without topcoat (C1 according to ISO12944-2:1998) and internal semi controlled environments with topcoat (C2 according to ISO12944-2:1998).
Recommended application via airless spray or brush. Must not be applied directly to galvanized steel and zinc rich primers. If it can be guaranteed that application and subsequent in-service conditions will be in a C1 environment as defined in ISO 12944-2:2007, then no topcoat is required. For any other situation a topcoat must be applied. Sher-Cryl M770, FIRETEX M71V2, Acrolon C137V2 or Acrolon C237 products should be used for subsequent re-decoration.
In common with other water based coatings, the drying of this material is retarded by high humidity conditions. Lack of air movement also slows down the drying process, and under such conditions it is advisable to introduce some method of circulating air over the coated surface in order to speed up the drying. A ventilated air speed of 2 metres per second is recommended. FIRETEX FX5062 must be applied in a dry internal environment. It must not be exposed to condensation, damp or wet conditions during or after application.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Certifire Approved – Certificate CF5267
- This product has been tested and assessed in accordance with the ASFP Yellow Book 5th Edition
- Drying Times: 3 hours at 15°C to touch, 6 hours at 15°C to recoat
- Available in White
- Available in 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.