Jotun Pilot WF (Waterfine) is a tintable single component water-borne acrylic fast drying emulsion coating for both interior and exterior use.
With a semi gloss finish, with good colour and gloss retention, Jotun Pilot WF will dry down to 10°C. Available in a wide range of colours in Jotun's Multicolor Decorative System - call for costs of specific colours.
This product is ideal for new construction or maintenance when fast return to service is required. This product is part of a complete system which is certified not to spread surface flames. Suitable as a topcoat for a range of industrial structures, structural steel, piping and concrete to be exposed to corrosivity categories up to C5. Recommended for refineries, power plants, buildings and mining equipment. Also recommended for accommodation and engine rooms.
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Applicable by airless sprayer with a nozzle tip between 13-19 thou, brush or roller. Recommended humidity range 30-75%.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Meets VOC content requirements for BREEAM International and BREEAM Nor
Contributes to satisfying the following credit(s):
- Indoor Environmental Quality (IEQ) under LEED® 2009
- Environmental Quality (EQ) and Materials and Resources (MR) under LEED® v4
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
|Type:||Water borne acrylic emulsion coating|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||57.0g per litre|
|Suitable Substrates:||Structural steel, piping and concrete|
|Application Method:||Airless Spray, Brush or Roller|
|Theoretical Coverage:||9.8 - 4.9m2 per litre|
|Wet Film Thickness (WFT):||105 - 205 microns|
|Dry Film Thickness (DFT):||40 - 80 microns|
|Touch Dry:||30 mins at 10°C|
|Overcoatable:||3 hours minimum at 10°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||24 months|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.