Sika Sikafloor 420

Sika Sikafloor 420 is a one part, elastic, low solvent containing, low odour, UV resistant, coloured, moisture triggered polyurethane resin coating.

Best Uses

Sikafloor 420 may only be used by experienced professionals. Smooth or slip resistant, UV resistant, waterproof, abrasion resistant coating for concrete and cementitious screed substrates. Ideal for light to medium mechanical exposure. Suitable for balconies, terraces, footbridges, stairways etc. Low odour formulation, High solids, Moisture triggered, UV resistant, non-yellowing, Weather resistant, Abrasion resistant with normal use, Slip resistant surfaces are possible, A range of finishes are available.

Application

The surface must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by vacuum. Pull of strength shall not be less than 1.5 N/mm2. If in doubt apply a test area first. Prior to use stir Sikafloor®-420 mechanically for 3 minutes. If required the Extender T should be added into the Sikafloor 420 until a uniform mix has been achieved. Over mixing must be avoided to minimise air entrainment. Can be applied by brush, roller or squeegee. At higher coverage rates Sikafloor 420 may be poured and spread evenly with a trowel. Clean all tools and application equipment with Thinner C immediately after use.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu