Sika Sikalastic 8800

Sika Sikalastic 8800 is a two part, elastic, 100% solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance.

Best Uses

Sika Sikalastic 8800 is formulated to provide an abrasion resistant protective coating in industrial and manufacturing facilities on concrete. Sika Sikalastic 8800 is also suitable for the waterproofing of cut and cover structures, submersed structures, walkways and balconies and floors and car park decks.

Sikalastic 8800 is also ideal for water retaining structures in power plants, secondary containment structures and tank, bund and pit lining in sewage and waste water treatment plants.

For steel, Sikalastic 8800 can be used for truck bed lining and the waterproofing and wearing layer on steel ridges.

• Very fast reactivity and curing time
• Almost immediate return-to-service time
• Applicable in temperatures from -20°C to +50°C
• Performs in constant dry temperatures from-30°C to +100°C
• Excellent crack bridging properties
• Good chemical resistance
• Excellent abrasion resistance
• UV light exposure may lead to yellowing
• Not resistant to biogenic sulphuric acid

Sika Sikalastic 8800 may only be used by experienced professionals.

Application

Dose and mix with a suitable air driven or electrical plural component heated spray equipment. Both components must be heated up to +70°C. The accuracy of mixing and dosage must be controlled regularly with the equipment. Thoroughly stir part B (Amine) using a drum stirrer until a homogeneous colour is obtained.

Sika Sikalastic 8800 is part of the extensive range of Sika Products available from Promain.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu