Rustoleum Surfa-Etch 108 Acid Etching Solution

Rustoleum-Mathys Surfa-Etch 108 Etching Solution helps to provide good adhesion properties to smooth, dense power floated floors as well as galvanised steel and aluminium.

Rustoleum-Mathys Surfa-Etch 108 Etching Solution is an acid-based formula designed for preparing power float floors and assures good adhesion to smooth dense surfaces. Rustoleum-Mathys Etching Solution 108 is available in 5 litre containers.

Best Uses

Rustoleum-Mathys Surfa-Etch 108 Etching Solution works well to neutralise alkaline contaminations, in light to heavy industrial exposures with power floated floors and is part of our extensive Rust-Oleum Cleaning and Degreasing range.

• Improves the adhesion of coating systems
• Neutralises alkaline salts
• Ideal to remove ´white rust´ from metal
• No objectionable odour or fumes
• Non-flammable

Application

Rustoleum-Mathys Etching Solution 108 should be applied using a stiff nylon brush or broom and left for 15 minutes. After this time has elapsed you will be able to clean the floor with water.

Surface and Environment

Rustoleum-Mathys Surfa-Etch 108 Etching Solution is a surface etch designed to provide good adhesion properties to smooth, dense power floated floors as well as galvanised steel.

Rustoleum-Mathys Surfa-Etch 108 Etching Solution can be used internally and externally for etching smooth concrete, masonry as well as aluminium.