FLAG Concrete Sealer

SKU
ID23960
UN1263 (Class: 3, Pk Grp: III)
An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.
Available in 5 Litres in Clear
£51.24 £42.70
In stock
Product Description

FLAG Concrete Sealer is a clear, gloss, thermoplastic acrylic resin formulated to give an oil / water-resistant, flexible and UV resistant finish to concrete floors and block paving driveways.

Best Uses

FLAG Concrete Sealer is suitable for interior and exterior use on concrete, stone, block paving floors and driveways to provide a hard wearing, water, petrol and oil resistant finish.

Application

Please note, some stone surfaces can change colour when this type of product is applied (e.g. Indian Sandstone turns brown). If in doubt, please carry out a small test application first.

Ensure the substrate is stable, firm dry and free from dust, sand, loose paint, dirt, grease and oil. Apply using a brush. Clean tools with xylene.

Technical Details
Components: Single Pack
Type: Xylene Based Thermoplastic Acrylic Resin
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content:
Volume Solids: 30%
Suitable Substrates: For concrete, stone, block paving floors and driveways
Application Method: Brush
Theoretical Coverage: 16 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 6 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Xylene
Shelf Life: See tin.
Packaging: Available in 5 Litres