£7.75 delivery on orders excluding certain products & postcodes *
Rustoleum EpoxyShield Clear Sealer Primer 5220 is a simple concrete protector with excellent penetrating properties. EpoxyShield 5220 offers excellent durability with non yellowing features to protect the surface against UV light.
Epoxyshield should be applied to clean and dry concrete surfaces. Do not apply Epoxyshield to smooth or very dense concrete floors or concrete that contains curing compound. The floor should be cleaned using EpoxyShield Cleaner/Degreaser 2901 to remove all oil, grease and other dirt. New concrete must be allowed to cure for minimum of 30 days. All laitance, loose or unsound concrete should be removed by blast-tracking, diamond grinding or acid etching with Rustoleum Surfa-Etch 108 Etching Solution.
Repair all holes and cracks with EpoxyShield concrete repair products. Very dense and smooth concrete should first be abrasive blasted (or surface etched). Rustoleum EpoxyShield Clear Sealer Primer 5220 can be applied using brush or roller and it recommended that all tools and brushes are cleaned directly after application with hot, soapy water. Once applied, Rustoleum EpoxyShield Clear Sealer Primer 5220 has a theoretical coverage rate of 10m2 per litre on smooth semi porous surfaces and is touch dry after just 1 hour at a room temperature of 20°C. providing the surface temperature of the floor slab is not to cold. The floor is ready for a recoating with floor paint such as Epoxyshield Ultra after 6 hours.
Temperature of air, substrate and coating material must be between 10 and 35°C, relative humidity (RH) below 85%. The substrate temperature must be at least 3°C above dew point. Ventilate well during and after application.
Rustoleum EpoxyShield Clear Sealer Primer 5220 is ideal for use with EpoxyShield ULTRA coatings and can be used internally or externally for the sealing of floors. When dry Rustoleum EpoxyShield Clear Sealer Primer has a glossy clear finish.
Components: | One Part |
Type: | Water Based on a vinyl acrylic binder |
Finish: | Gloss |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 77.0g per Litre |
Volume Solids: | 30% |
Suitable Substrates: | For bare and clean concrete floors |
Application Method: | Brush, Roller |
Theoretical Coverage: | Maximum 10 m2 per litre |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | Approx 1 hour at 20°C |
Overcoatable: | Walkable: after 8 - 12 hours at 20°C |
Fully Cured: | - |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C |
Packaging: | Available in 5 Litres |