Coo-Var Q221 Profloor Plus Cold Cure is a two pack epoxy floor coating capable of curing at low temperatures, indoors and outdoors.
Coo-Var Q221 Profloor Plus Cold Cure is a two pack epoxy floor coating capable of curing at low temperatures, indoors and outdoors.Coo-Var Q221 Profloor is an extra heavy duty floor paint providing an extremely hard wearing surface with a gloss finish. One of the main features of this floor paint is its ability to cure at low temperatures (between zero and ten degrees Celsius) and has zero VOC. Profloor Plus is particularly valuable for applications at colder times of the year when the temperature is too low for Coo-Var Q221 Profloo.
As Coo-Var Q221 Profloor Plus Cold Cure is a low odour product, it is ideal for use in the food industry, for example in preparation, processing and storage areas or bakeries, dairies and breweries etc. Areas where solvent based products would be unsuitable. The hard wearing, chemical and oil resistant properties also make Coo-Var Q221 Profloor Plus Cold Cure ideal to use in showrooms, display areas, supermarkets, warehouses and workshops.
The base and hardener should be conditioned at normal room temperature, making the mixing process easier. The working temperatures of the area to be coated, should not be allowed to fall below zero degrees Celsius, throughout the application and curing period. If this criteria is not observed the cure of the material will be retarded and surface finish adversely affected. Ensure that the floor area is clear and prepared, and that all equipment is readily available prior to mixing. Mix the entire contents of the base with the hardener thoroughly, using a slow speed electric mixer. Take care to mix the product thoroughly but do not over mix as this will reduce working time with the product.
Surfaces and Environment
Coo-Var Q221 Profloor Plus Cold Cure floor coating is suitable for use in most industrial environments. It can be used on concrete, polymer screeds, asphalt etc. and provides a durable, decorative, attractive and easily cleanable surface. The low cure temperature makes this product particularly useful in the coating of areas where it is difficult to maintain a surface temperature above 10 degrees Celsius during the application and curing period.
- Coo-Var Q221 Profloor Plus Cold Cure
- A high build two pack epoxy floor paint, for use inside and out
- Cures at low temperatures between 0-10°C
- Low odour, Zero VOC
- Hard wearing surface
- High build providing a small degree of self levelling
- Excellent chemical resistance
|Stock Colours:||Tile Red, 00-A-05, 00-A-09, Black, Blue, Poppy Red, Buff, Forest Green, White and Yellow|
|Tintable:||Special colours can be produced, but may be subject to a surcharge. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For concrete floors|
|Application Method:||Notched Trowel, Squeegee and Roller|
|Theoretical Coverage:||4.5 m2 per Kg per coat|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||180 - 200 microns|
|Pot Life:||15 minutes at 20°C|
|Overcoatable:||After 18 hours at 5°C|
|Fully Cured:||36 hours at 0°C|
|Cleaner / Thinner:||Coo-Var Thinners 16|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.