Sikafloor 161 Epoxy Primer is a moisture tolerant solvent free epoxy primer that works as a universal primer for use with most Sika floor systems.
Sikafloor 161 Epoxy Primer is best used on troweled or tampered concrete floors or onto blasted power floater floors and priming concrete substrates prior to the application of a decorative and protective topcoat.
Used for priming concrete substrates, cement screeds and epoxy mortars, not suitable for application directly onto power floated floors without being blast tracked first.
This product has been used in high end automotive garage floors such as the Ferrari dealership in Manchester. See our blog here:
Sikafloor 161 Epoxy Primer can be applied using brush or roller and offers excellent penetration and adhesion with short drying times. 161 has excellent flowing properties allowing for easy application with a theoretical coverage rate of 2-3m2 per litre.
Surface and Environment
Sikafloor 161 Epoxy Primer is suitable for use on all concrete surfaces and is a multi purpose product that can be used in most internal environments such as warehouses, factories and workshops.
|Type:||Low viscosity epoxy resin|
|Stock Colours:||Brownish Translucent|
|VOC Content:||500.0g per Litre|
|Suitable Substrates:||For priming concrete substrates, cement screeds and epoxy mortars|
|Application Method:||See product data sheet|
|Theoretical Coverage:||See product data sheet|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Cleaner / Thinner:||Clean all tools and application equipment with Sika Thinner C immediately after use|
|Shelf Life:||24 months from date of production|
|Packaging:||Available in 10 and 30 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.