Sikafloor-Comfort Porefiller is a two part, total solid, low VOC, polyurethane which is used for sealing and levelling.
Sikafloor-Comfort Porefiller forms an important part of the Sika-ComfortFloor Pro and Sika-ComfortFloor Decorative Pro Systems. With its low VOC and polyurethane properties, it is of particular benefit for interiors where a low odour and easy clean product is an asset. Condensation should be avoided during the application of Sikafloor-Comfort Porefiller.
Sikafloor-Comfort Porefilleris a durable high quality compound which is used for sealing and levelling the permeable surface of prefabricated granular rubber sheets. Sikafloor-Comfort Porefiller is suitable for interior use and particularly so within areas such as hospitals, schools and open plan offices, where a low odour product is particularly relevant.
Prior to application, surfaces should be mechanically prepared to remove cement laitance and achieve an open textured surface. Sikafloor-Comfort Porefiller should be mechanically stirred but over mixing must be avoided to minimise air entrainment. Sikafloor-Comfort Porefiller should be applied with a serrated/notched trowel in order to achieve a smooth wearing layer. Please read the techinical data sheets for full preparation and application methods.
Surface and Environment
Sikafloor-Comfort Porefiller provides a sealed and levelled surface for concrete substrates and cemetitious screeds. It is suitable for interior environments and the substrate / uncured floor must be at least 3°C above dew point.
- Forms part of the Sika-ComfortFloor Pro and Sika-ComfortFloor Decorative Pro Systems
- Low Volcanic Compounds
- Two part, total solid
- Poyurethane sealer and leveller
- Avoid condensation
- Apply with a serrated/notched trowel
- Avoid rising moisture
- Size 20 kg tins.
|Type:||PUR used for sealing and leveling|
|Stock Colours:||Resin Part A: Light Grey, Hardener Part B: Brown Transparent|
|VOC Content:||<500.0g per Litre|
|Suitable Substrates:||Durable high quality compound used for sealing and levelling of the permeable surface of prefabricated granular rubber sheets|
|Application Method:||Metal Trowel|
|Theoretical Coverage:||Depending on the Shockpad structure.
Approximately 0.4 Kg per m2 for the Comfort Regupol 4580
Approximately 0.5 Kg per m2 for the Comfort Regupol 6015 H
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||20 minutes at 20°C|
|Overcoatable:||Between 8 to 60 hours at 20°C|
|Fully Cured:||60 hours at 20°C|
|Cleaner / Thinner:||Clean all tools and application equipment with Sika Thinner C immediately after use|
|Shelf Life:||12 months from date of production|
|Packaging:||Available in 20 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.