Sika Sikafloor 330

SKU
ID10009
Non Hazardous
A two part, solvent free, very low VOC emission certified, elastic, self-smoothing PUR resin.
Available in 20 Kg
From £391.66 £326.38
In stock
Only %1 left
Product Description

Sika Sikafloor 330 solvent free floor paint reduces footfall sound and protects floors against abrasion and mechanical damage.

Sikafloor-330 is a two component, solvent-free, elasticated, self-smoothing PUR resin floor paint designed for interior use and application to a variety of different substrates. Sikafloor-330 is solvent free and has a very low VOC emission. It has a good resistance to mechanical damage and reduces the sound of footfall, whilst being a low maintenance finish.

Best Uses

Sikafloor-330 is best used in conjunction with Sika Floor 161 Epoxy Primer, ensuring a strong adhesion bond and a surface that is resistant to abrasion and mechanical damage. This product is highly suited for application to floors in hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums and other public areas which are exposed to a high level of foot and vehicle traffic.

Application

Sikafloor-330 is an easy to apply product. Using a serrated trowel, to spread evenly and then roll in two directions using a spiked roller, which will ensure an even thickness and remove entrapped air. Once dry, a second seal coat should be applied using a short pile roller. Please read the technical data sheets for full preparation and application methods.

Surface and Environment

Sikafloor-330 can be used over the Sika Floor 161 Epoxy Primer and the Sikafloor Comfort Adhesive. Sikafloor-330 is part of the ComfortFloor and ComfortFloor Pro systems, which are for application to interior concrete substrates, cement screeds and epoxy mortars.

 

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

Technical Details

Approvals

  • Coating for concrete protection according to the requirements of EN 1504-2:2004 and the EN 13813:2002, DoP 02 08 01 04 040 0 000001 1041 certified by Factory Production Control Body, 0620 and provided with the CE-mark.
  • Fire classification acc. to EN 13501-1, Test reports 08-198 and 08-199, Ghent University
  • Cleanroom® suitable material as part of the Sika ComfortFloor® and Sika ComfortFloor® Pro systems. Fraunhofer IPA, Germany report no. SI 1008-533
  • Eurofins Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt –German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Reports No. 765863F, 7712844A and 770029B. Impact sound reduction according EN ISO 140-8, test report 102-B-08, iba Institut Gottfried & Rolof Germany.
  • Determination of wear resistance EN651:2004 , indentation EN 651:2004, castor chair suitability EN425:1994 and effect of simulated movement of furniture leg according EN 424:2002 reports 391575-02 and 391580-02 TFI institute Aachen Germany.

Systems

  • Sika ComfortFloor®
  • Sika ComfortFloor Pro PS-65
  • Sika ComfortFloor PS-23

Technical Info

Components: Two Part
Type: Solvent Free, Elastic, Self Smoothing PUR Resin
Finish:  
Stock Colours:

Available in 9 Standard approximate RAL colours:

RAL 1014, 2000, 3009, 5015, 6010, 7042, 8002, 9001, 9005

The colour of the Sikafloor®-330 has to be approximately adjusted to the colour of the Sikafloor®-305 W

Tintable: On Request. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 330.0g per Litre
Volume Solids: 100%
Suitable Substrates: An elastic smooth wearing course for the Sika Comfort-Floor® and Sika ComfortFloor® Pro Systems
Application Method: Serrated Trowel or Pin Rake
Theoretical Coverage: 1.4 Kg per m2 per mm
Wet Film Thickness (WFT): See system data sheet
Dry Film Thickness (DFT): See system data sheet
Induction Time: -
Pot Life: 15 minutes at 20°C
Touch Dry:  
Overcoatable: Between 16 - 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean all tools and application equipment with Sika Thinner C immediately after use
Shelf Life: 6 months from date of production
Packaging: Available in 20 Kg

Related Products