£7.75 delivery on orders excluding certain products & postcodes *
Johnstone’s Trade Flortred is suitable for use on concrete, steel and wooden floors, in light to medium traffic areas. In areas prone to slip risk, the slip resistance of all Johnstone’s floor coatings can be improved with Johnstone's Anti-Slip Additive. Recommended for internal use in light to medium traffic areas.
All surfaces to be painted should be clean, dry and free from dust, laitance and loose or flaking material. New concrete or cement should be allowed to mature for several months before painting. Very dense smooth concrete surfaces, such as power floated concrete, normally need to be acid etched before painting in order to promote satisfactory adhesion.
Stir well before use. Apply by brush or roller which should be fully loaded for best results. Apply evenly and avoid overspreading. First coat can be thinned up to 5% by volume of TC2 Thinner & Cleaner. Allow to dry overnight before applying a second coat if required. If more than one can of a colour is to be used in the same area, intermix before use.
Solvent: | Solvent Based (White Spirit) |
Finish: | Semi-Gloss |
Stock Colours: | Black, Clear, Dark Green (14C39), Dark Grey (18B25), Morning Mist (10A03), Princess Grey (00A05), Sherwood Green, Safety Yellow (08E51), Safety Red (04E53), Safety Blue (18E53), Tile Red, White |
Tintable: | Yes to Johnstones 16,000 Colour Range. Please note, bespoke tints are non refundable / exchangable. |
VOC Content: | High VOC Content 25–50% |
Volume Solids: | 48% |
Suitable Substrates: | Concrete, Steel, Wooden Floors in light to medium traffic areas |
Application Method: | Brush or roller |
Theoretical Coverage: | 11 m2 per litre |
Wet Film Thickness (WFT): | 90μm |
Dry Film Thickness (DFT): | 44μm |
Drying Time: | |
Recoatable: | After 16–24 hours under normal drying conditions |
Cleaner / Thinner: | TC2 Thinner and Cleaner |
Shelf Life: | |
Packaging: | 2.5 and 5 Litres |