£7.75 delivery on orders excluding certain products & postcodes *
A powerful, water washable, solvent free remover and cleaner that strips out new, old and encrusted oils from exterior wooden marine surfaces.
A fast acting cleaner for fenders, inflatables, hulls, decks etc. Removes tough marks and stains quickly restoring the surface to its original conditi...
Aa universal anti-rust primer made from alkyd resins and anti-corrosive pigments for the priming and protection of numerous substrates.
A one pack polyurethane, non-slip finish for boat decks, step treads and other horizontal surfaces.
A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A one part, water-repellent, cementitious skimming mortar with a fine, natural finish for internal and external concrete, lime based render, old quart...
Provides a protective and decorative coating that protects the surface from Mould and Mildew for at least 5 years, guaranteed!
An alkaline, non-caustic detergent based in water and designed as a degreasing pre-treatment for soiled and contaminated surfaces.
A versatile quick drying, single pack anti-corrosive primer for steel.
A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...
Suitable for application over the top of Johnstones Trade 2 Pack Anti Graffiti Finish.
A low odour, highly durable semi-gloss 2 pack water based epoxy coating which is resistant to chemical attack and abrasion.
A high performance, tough acrylic resin based interior coating, formulated to assist in the fight against hospital acquired infections, caused by harm...
A water-based satin gloss 2K polyurethane for a very durable and colour-fast finish on metal or wood.
A biodegradable multiple layer paint stripper, formulated for removal of most paint types, urethanes and other coatings.
A pack of 5 Tactile Paving System use for railway platforms, pedestrian crossings, start of ramped areas and many other tactile paving areas.
An internal and external masonry paint available in various grain sizes for use where mould or fungi growth can be an issue.
Provides a short flash-off between coats and prior baking in a short time for Selemix 8-110 Gloss and 8-111 Matt.
A 2 part, solvent free, self levelling coating for floors such as mechanically loaded surfaces subject to foot and vehicle traffic.
A solvent free, amine activation accelerator for Remmers Epoxy Flex PH Color and Remmers Epoxy ST 100.
A general purpose, concentrated acidic cleaner for brick, tile and concrete surfaces internally and externally.
A pure, solvent free catalyst used to speed up the drying time of Protecta-kote non-slip and smooth coatings.