£7.75 delivery on orders excluding certain products & postcodes *
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
An extreme performance pipeline coating for hot, cryogenic and cycling exposures.
A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.
Used with certain Carboline and Nullifire coatings to thin paint or clean tools as required.
Used with certain Carboline coatings to thin paint or clean tools as required.
Used with certain Carboline coatings to thin paint or clean tools as required.
Used with certain Carboline coatings to thin paint or clean tools as required.
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
A water-borne semi-gloss topcoat for internal wood such as cladding, mouldings, doors, window frames and furniture.
Formulated for the fixing of GRP and tactile pavers to concrete, metal and wooden floors.
A single pack, solvent borne, acrylic resin based, thermoplastic primer for concrete and block paving.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
An aliphatic polyurethane, weather resistant topcoat repair for use on wind turbine blades.
For instant, up close, crystal clear images – up to 100M* distance via Bluetooth.
A quick drying, gloss, brush applied container and skip metal paint.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.
A waterborne acrylic copolymer surface dust binding treatment for concrete and masonry surfaces.