We have now discontinued this product. Please consider CentreCoat All Surface Protector as an alternative
Guard Industries ImperGuard XP Concrete Water Repellent is water repellent product designed to protect building façades against dampness and moisture.
ImperGuard works as an impregnation treatment that offers long lasting protection against rain penetration in walls whilst allowing them to breathe. The presence of surfactants in the product lowers the surface tension of the solution and means equally good results can be obtained as when using a solvent-borne product. In the majority of cases, ImperGuard's water repelling qualities become fully effective two to five days after application.
Guard Industries ImperGuard XP Concrete Water Repellent is designed for both indoor and outdoor use on any kind of porous material, although this type of treatment is relevant only for vertical or steeply sloping surfaces. As well as being water resistant, ImperGuard clear sealant is also offers protection against UV light damage in external environments.
Guard Industries ImperGuard XP Concrete Water Repellent should be applied when to dry surfaces where the conditions are expected to stay dry for at least 2 days to give chance for the product to take full effect. ImperGuard XP Concrete Water Repellent is completely clear and colourless after application and doesn't change the colour of the surface. Apply ImperGuard using a brush or roller for a coverage rate or 3-5m2 per litre.
Surface and Environment
Guard Industries ImperGuard XP Concrete Water Repellent is specially designed for concrete surfaces where there is a strong need for a water protective agent to prevent any damages occurring. ImperGuard XP Concrete Water Repellent can be used on natural stone, concrete, terracotta, cement and self-locking paving blocks for optimum performance.
- Effective for more than 10 years, as demonstrated by the CSTC
- Can be applied to vertical, horizontal, inside and outside surfaces
- Prevents the penetration of water based liquids
- Limits efflorescence formation
- Limits moss and lichen growth.
- Prevents deterioration resulting from the freeze-thaw cycle
- Makes cleaning easier
- Non film-forming, and allows the surface to breathe
- Non-hazardous and non-toxic
- Water-borne product
- Solvent free
- 95% + biodegradable according
- UV-resistant, does not discolour
- Invisible after drying
- Ready to use 3-5 m2 per litre
- Easy to use.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.