This product is now out of stock. Please contact our technical team for an alternative.
Guard Industries ProtectGuard HD (FT) Heavy Duty is a water repellent, oil repellent, dirt and stain resistant protective coating for low porosity materials for walls, flooring and roofing inside or outside.
Guard Industries ProtectGuard HD (FT) Heavy Duty is a water repellent, oil repellent, dirt and stain resistant protective coating for low porosity materials for walls, flooring and roofing inside or outside. Guard Industries ProtectGuard HD is part of our fantastic range of roof tile paints and can be used effectively to protect roofs against water and chemical attack, as well as protecting against attacks from fungi.
Guard Industries ProtectGuard HD provides an all-round protection for low porosity materials such as certain granite, polished concrete, marble, granite ware, terracotta. A material treated with ProtectGuard HD becomes almost self-cleaning: where rain will remove most stains. Limits the appearance of efflorescence, and prevents spawling through repeated freeze/thaw cycles.
Guard Industries ProtectGuard HD (FT) is best used for protecting walls, ceilings, flooring and roofing, made out of various different materials and works well to resist resisting penetration of water, air-borne dirt, acid rain, smog, industrial pollutants, oil and grease stains, graffiti, chewing-gum, dust and organic growth (lichens and moss). Oil and fuel stains will no longer penetrate or stick to a surface.
Guard Industries ProtectGuard HD (FT) is an environmentally friendly product that when applied will not cause harm to people, animals or the surface/air surround it. Apply ProtectGuard HD (FT) using brush, roller or low pressure sprayer for a coverage rate of 5-12m2 depending on the surface and the porosity of it. Guard Industries ProtectGuard HD (FT) is found in our Roof Tile Paint range and is available in 1 litre tubs.
Surface and Environment
Guard Industries ProtectGuard HD (FT) is suitable to be used on surfaces subject to high traffic such as pavements, pedestrian precincts, car parks, petrol forecourts, terraces, balconies, patios, swimming pool decks, barbecue areas, stairs, floors. Once applied the coating protects the material from weathering, UV light and does not change colour over time, even though the coating is completely clear.
- Environmentally-friendly, completely water-borne (non toxic, solvent and silicone-free)
- ProtectGuard HD (FT) Heavy Duty is totally colourless after application
- Non film-forming, lets the surface breathe
- It is UV-resistant and does not discolour with age
- Effective for more than 10 years
- Apply using a low-pressure sprayer, roller or brush
- Coverage per litre (depends on the porosity of the material) but as a guide:
- Marble 10.00 sq. metres
- Sandstones and Granite 12.00 sq. metres
- Terracotta 5.00 sq. metres
- Clean tools and equipment with water
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.