Treatex Colour Tone for Timber Floors *CLEARANCE*

UN1263 (Class: 3, Pk Grp: III)
Protect and enhance the natural beauty of wood with Treatex Colour Tone under Treatex Hardwax Oil.
Available in 1 Litre
From £9.00 £7.50
In stock
Only %1 left
Product Description

This product will shortly be discontinued and be replaced by a Ultra version.

Treatex Colour Tones have been designed to give you a beautiful range of colours with which you can change how your floors, doors, stairs and worktops look and feel, without hiding the grain or the natural beauty of the wood.

This allows you to match the colours in your home when every piece of wood is different, being that every tree is unique. Treatex Colour Tones penetrate deep into the wood and enhance its natural beauty, manufactured on a base of natural sustainable raw materials and then completed with natural pigments used to colour the oils.

Best Uses

Treatex Colour Tones have been designed especially for Timber Floors and works to protect and enhance the natural beauty of the wood, with excellent penetration and durability, this product has been highly recommended among the national retail chains. Being easy to clean on a frequent basis, and highly protective, Hardwax Oil allows for easy maintenance.


Treatex Colour Tones can be applied using brush, spray or roller and has a theoretical coverage rate of approximately 20m2 per litre with a touch dry time of 3-6 hours depending on temperature and humidity.

Treatex Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied.

Technical Details


  • Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied
  • Easy to apply
  • Quick drying
  • No sanding required between coats
  • Low odour


  • Apply by brush, roller or spray
  • Touch dry 3-6 hours
  • Clean up using white spirit
  • Theoretical coverage 20m2 per litre.
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use