*Hempel Hemucryl Enamel 58100

SKU
ID24003
***
This product is now discontinued. See Hempel Hemucryl Enamel 58030 as an alternative.
Out of stock
Product Description

Please note, this product is now discontinued. See Hempel Hemucryl Enamel 58030 as a sprayable alternative.

Hempel Hemucryl Enamel 58100 is a glossy finishing coat that dries to a non-yellowing coating with low dirt pick-up, good weathering properties, and high gloss retention. 

Best Uses

Hempel Hemucryl Enamel 58100 is suitable for both interior and exterior use, in mildly to moderately corrosive environments. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account.

Application

The recommended application method for Hempel's Hemucryl Enamel 58100 is by either roller or brush. If you are looking to use an airless spray, then Hemucryl Enamel Hi-Build 58030 is recommended.

Always ensure that the surface to be painted is cleaned of all oil, grease and other contaminants by using a suitable detergent. Remove salts, detergents and marine growth by high pressure fresh water cleaning. Stir the product well before use.

See Application Guide for specific surface preparation.

Technical Details
Components: Single Pack
Type: Water-borne
Finish: Glossy
Stock Colours: 10000 White
Tintable: Yes. Please note, tinted products are non-refundable.
VOC Content: 52 g/L
Volume Solids: 41 ± 2%
Suitable Substrates: Steel, Aluminium, Stainless steel, Hot dipped galvanised steel, Zinc silicate coated surfaces
Application Method: Brush or Roller
Theoretical Coverage: 8.2 m²/L
Wet Film Thickness (WFT): 120 µm
Dry Film Thickness (DFT): 50 µm
Pot Life: -
Surface Dry: 15 minutes at 20°C
Overcoatable: The surface must be dry and clean prior to application.
Cleaner / Thinner: Fresh Water
Shelf Life: 3 years from date of production unopened 
Packaging: Available in 20 Litres

Related Products