Highways Agency Paint

HIGHWAYS AGENCY-APPROVED PAINTS

Promain are able to offer the full range of paints specified by the Highways Agency known as Item numbers, these are paints that have been tested and approved for the Highways Agency providing them with a quality controlled range of products from manufactures such as PPG Sigma formally known as Ameron, Amercoat, Mebon and Mebopro. Other manufactures such as Leigh’s Paints who have now been acquired by Sherwin Williams, 3M, Hempel, Jotun, and Dacrylate Paints also offer a range of coatings that fit the Highways Agency criteria,

Items 1-28 of 51

Set Descending Direction
  1. International Intertuf 16
    International Intertuf 16

    A one pack, high build bituminous coating for use behind linings and in cofferdams for the protection of enclosed steel. Highways Approved Item No.141...

    From £59.51 £49.59
  2. PPG Sigma EP 159 Sealer
    PPG Sigma EP 159 Sealer

    A two pack epoxy sealer pigmented with aluminium. Highways Approved Item 159.

    From £102.89 £85.74
  3. Hempel Hempathane 55810 HS
    Hempel Hempathane 55810 HS

    A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

    From £87.60 £73.00
  4. Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3
    Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3

    A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

    From £98.80 £82.33
  5. Sherwin Williams Zinc Clad IV EU Formerly M501
    Sherwin Williams Zinc Clad IV EU Formerly M501

    An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

    From £555.12 £462.60
  6. International Interzinc 52
    International Interzinc 52

    A two component, anti-corrosive metallic zinc rich epoxy primer.

    From £340.96 £284.13
  7. International Interthane 990
    International Interthane 990

    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

    From £116.82 £97.35
  8. International Interthane 870
    International Interthane 870

    A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

    From £99.79 £83.16
  9. International Interfine 691
    International Interfine 691

    A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

    From £96.59 £80.49
  10. International Interfine 878
    International Interfine 878

    A tough, hard wearing finish coat for application over properly primed surfaces.

    From £1,290.38 £1,075.32
  11. International Interseal 670HS
    International Interseal 670HS

    For use on a wide variety of substrates including hand prepared rusty steel.

    From £98.82 £82.35
  12. Hempel Hempadur Mastic 45880
    Hempel Hempadur Mastic 45880

    A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

    From £63.74 £53.12
  13. PPG SigmaCover 690 Aluprimer
    PPG SigmaCover 690 Aluprimer

    A two component high solids aluminium pigmented polyamine cured modified epoxy primer. Highways Item 115.

    From £108.83 £90.69
  14. PPG PSX 700 Engineered Siloxane
    PPG PSX 700 Engineered Siloxane

    For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

    From £373.15 £310.96
  15. PPG SigmaShield 460
    PPG SigmaShield 460

    A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123

    From £464.40 £387.00
Page
per page