£7.75 delivery on orders excluding certain products & postcodes *
PPG Sigma EP 110 Primer can be used suitably under all other zinc based topcoats to provide a high performance system that works well to protect substrates from abrasion, corrosion and various chemical spillages in an industrial environment.
PPG Sigma EP 110 Primer can be applied using brush, roller or airless spray, which is the best method of application, ensuring a pleasing finish. Sigma EP 110 Primer is touch dry after 20 minutes and can be overcoated after just 4 hours, which helps reduce downtime in a working environment.
PPG Sigma EP 110 Primer can be used internally or externally on a variety of different substrates including blasted steel, wood and concrete, and is suitably used as a primer or a sealer that can cover small cracks and voids.
Components: | Two Components |
Type: | Zinc Phosphate Blast Primer / Sealer |
Finish: | Eggshell |
Stock Colours: | Buff BS 08-C-35 |
Tintable: | No |
VOC Content: | 554 g/l |
Volume Solids: | 43 +/- 2% |
Suitable Substrates: | Blasted steel, wood and concrete |
Application Method: | Brush, Roller, Airless Spray or Air Spray |
Theoretical Coverage: | 17.2 m2/l for 25 microns |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | 25 - 50 microns depending on system |
Induction Time: | None |
Pot Life: | 8 hours at 20°C |
Touch Dry: | 20 minutes at 20°C |
Overcoatable: | After minimum 4 hours to maximum of 3 months at 20°C |
Fully Cured: | 5 days at 20°C |
Cleaner / Thinner: | |
Shelf Life: | At least 12 months |
Packaging: | Available in 4 and 20 Litres |