PPG SigmaShield 460

SKU id3952 Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469, (Class: 3, Pkg Gp: III)
A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123
Available in 20 Litres
£254.56 (£305.47 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£254.56 (£305.47 Inc VAT)

Product Description

SigmaShield 460 is a two component high solids glass flake reinforced poly amine adduct epoxy coating offering long term protection in areas subject to heavy wear and tear. Highways Agency Item No.123.

Best Uses

SigmaShield 460 can be used on steel and blasted steel and offers excellent abrasion and impact resistance in industrial and marine exposures. Sigmashield 460 is highly suited for use on ice-going vessels and offers extremely good corrosion resistance that protects the surface from natural damage caused by the environment.


SigmaShield 460 can be applied easily and effectively using brush, roller or spray and has a good drying of 3 hours to touch. After 16 hours you will be able to apply a second coating which will reach full cure after 5 days.

Surface and Environment

SigmaShield 460 is highly suited for use in a marine type environment where protection against water and chemicals is vital. 460 offers very low water permeability due to the glass flake barrier.

Recommended Products To Use

PPG Thinner 90-53

PPG Thinner 90-53

A thinning substance specially formulated for use with various different PPG paints and coatings.

£29.22 (£35.06 Inc VAT)
PPG Thinner 91-92

PPG Thinner 91-92

Thinner 91-92 is a clear, thinning product specially designed for use with various different PPG Sigma paints.

£34.47 (£41.36 Inc VAT)