Our Sherwin Williams product range includes coatings which have each been specifically manufactured for application to structural, galvanised and stainless steel surfaces, as well as surfaces which are submerged under water. The range of coatings found within this section are Highways Agency Approved – which is identified by an Item Number.
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
This product is now discontinued.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115