£7.75 delivery on orders excluding certain products & postcodes *
Natural oil for outdoor use for protection of garden deck floors, jetties and wooden garden furniture. Other suitable objects are fences, trellises, doors and stairs. Also for untreated, heat-treated and press-impregnated wood. Applied on clean, dry wooden surface by brush, sponge or by dipping, it protects exterior wood from moisture, soiling and when tinted from UV radiation of the sun. In addition, it diminishes cracking of the wooden surface.
Note: this product is not suitable for greenhouses, hotbeds and shelters for livestock.
Clean the surface to be treated. Rinse the surfaces thoroughly with water and allow to dry. Remove from the surface all loose and poorly adherent old matter and fluffy top layers of the wood. We recommend that untreated wood is primed with wood preservative from WOODEX-series. Remove old paint or varnish layers before the treatment.
Stir well before application. If the product is tinted this must also be stirred during the application, if needed. Applied on the surface 1 - 2 times by brush, sponge or by dipping. The wood oil can be diluted by 10 - 30% to improve the absorption. Depending on the quality of the wood, the treatment is renewed. The possible excess oil is wiped off.
The surface to be treated must be dry. The relative moisture of the wood must be below 20% of the weight of the wood. During the application and drying period, the temperature of the ambient air, the surface and the product shall be above +5 °C and the relative air humidity below 80%. Painting in strong sunlight or in moist weather is to be avoided.
Components: | Single Pack |
Type: | Water-borne wood oil |
Finish: | - |
Stock Colours: | Teknos T8xxx colours |
Tintable: | No |
VOC Content: | The product is not included in the EU VOC directive. |
Volume Solids: | 10% |
Suitable Substrates: | Garden Deck Floors, Jetties, Wooden Garden Furniture, Fences, Trellises, Doors and Stairs |
Application Method: | Brush, Sponge or Dipping |
Theoretical Coverage: | Sawn timber 5 - 8 m²/l, Planed timber 8 - 10 m²/l |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 4 hours at 23°C |
Overcoatable: | After 16 hours at 23°C |
Fully Cured: | 24 hours at 23°C |
Cleaner / Thinner: | Water |
Storage: | Must not freeze |
Packaging: | Available in 2.7 and 9 Litres |