Coo-Var Water Based Brick and Tile Paint

SKU
ID21406
Non Hazardous
Formulated to decorate and protect the façade of a brick property.
Available in 2.5 and 5 Litres in Matt Red
From £43.09 £35.91
In stock
Only %1 left
Product Description

Coo-Var Water Based Brick and Tile Paint is formulated to decorate and protect the façade of a brick property.

Best Uses

Coo-Var Brick and Tile Paint Matt Red provides a flat "brick" red finish to stone, concrete, plaster, render and most bricks.

Application

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate, then prepare accordingly.

Mix well before use. Apply direct to stable surfaces.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: Red
Tintable: No
VOC Content: 30 g/L
Volume Solids: 36%
Suitable Substrates: For stone, concrete, plaster, render and most bricks.
Application Method: Brush, Roller
Theoretical Coverage: 13 m2 per litre at 40 microns
Wet Film Thickness (WFT): 75 microns
Dry Film Thickness (DFT): 35 - 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Water
Shelf Life: See containers
Packaging: Available in 2.5 and 5 Litres

Related Products