Zinsser AllWeather Exterior Masonry Paint (Pliolite Based)

SKU
id23674
UN1263 (Class: 3, Pk Grp: III)
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
Available in 5 Litres. Tintable to most BS, RAL and NCS colours
From £78.59 £65.49
In stock
Only %1 left
Product Description

Zinsser AllWeather Exterior Masonry Paint is Pliolite masonry paint that dries in temperatures as low as -5°C. Use Pliolite masonry paint on previously painted render, concrete, stone and brickwork.

Best Uses

Zinsser AllWeather Exterior Masonry Paint is a Pliolite based paint for use on previously painted walls or new render, brick, stone, stucco and cured concrete plus many other surfaces. It is self-priming and will bond to existing paints without the need for sanding. This means that for many refurbishing jobs there is no need to purchase a separate primer.

Some performance characteristics include:

  • Can be applied in cold temperatures down to -5°C
  • Pliolite based
  • Resists attack by alkalis and acid
  • Resists dirt accumulation
  • Showerproof in just 20 minutes
  • Recoatable after 3 hours
  • Excellent resistance against cracking blistering and flaking
  • Protects against rain and severe weather

Application

Before applying Pliolite masonry paint the surface should be clean and dry with any loose or peeling paint removed. Any mould and mildew should be removed using Blackfriar® Fungicidal Wash. After removing the existing mould and mildew, two coats of AllWeather Exterior Masonry Paint will ensure that any exterior looks bright and beautiful for years.

AllWeather Exterior Masonry Paint is not intended for application to exterior floors, decks or any surface subject to water immersion or prolonged contact with water.

What is Pliolite Masonry Paint?

Pliolite is a synthetic rubber resin that is used in the formulation of some solvent based masonry paints. It is used mainly during winter months as it is fairly fast drying. Pliolite masonry paint benefits from being highly resistant to damp in the air (high humidity) during application. Pliolite masonry paint is showerproof within 20 minutes at 20°C. This helps protect the surface from water damage to the surface. Pliolite paint can be applied to brick, render, pebble-dash walls in damp climates or where there is a likelihood of rainfall.

Technical Details

Features

  • Flat matt breathable finish
  • Resists attack by alkalis and acid
  • Resists dirt accumulation
  • Can be applied down to -5°C
  • Showerproof in 20 minutes

Limitations

AllWeather Exterior Masonry Paint is not intended for application to exterior floors, decks or any surface subject to water immersion or prolonged contact with water.

Technical Info

Components: Single Pack
Type: Solvent Based
Finish: Flat Matt Breathable Finish
Stock Colours: White and Black
Tintable: Yes, to BS4800, RAL and NCS full range. Please note, bespoke tints are non-refundable / exchangeable
VOC Content: < 430g/l
Volume Solids: 50%
Suitable Substrates: Bare or previously painted concrete, render, stone and brickwork
Application Method: Brush, Roller or Spray
Theoretical Coverage: 12m2 per litre per coat.
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: -
Touch Dry: Showerproof in 20 minutes at 21°C
Overcoatable: After 3 hours at 21°C
Fully Cured: After 7 days at 21°C
Thinner: For bare or porous surfaces it is advisable to apply a ‘mist coat’ of AllWeather Exterior Masonry Paint, thinned 10% with white spirit. 
Cleaner: Clean equipment with white spirit
Shelf Life: 3 years from date of production unopened
Packaging: Available in 5 Litres

Related Products