*Owatrol Tropitech All in One

SKU
ID9910
***
This product is now discontinued.
In stock
Product Description

Please note, this product is now discontinued. Contact our technical team for a suitable alternative.

Owatrol Tropitech All in One is ideal for extreme environments, withstands severe traffic on hardwood, softwoods, pressure-treated timber and decking.

Owatrol Tropitech All in One is a premium quality 100 % semi-transparent acrylic finish, which effectively seals wood, resisting moisture penetration, rot and decay. It contains an effective fungicide that resists mildew and a powerful UV screener that filters out the sun's harmful ultraviolet rays, thereby retarding the ageing (silvering) process of wood.

Best Uses

Owatrol Tropitech bonds "in" and "on" the wood to provide a tough, durable, lustrous finish that both protects and enhances the appearance, beauty and character of the wood. The Tropitech system enables preparation and finish to be completed the same day. Swimming Pool and Hot Tub surrounds, Decks, Docks, Cladding and Shingles are among the best wooden structures in which to use Tropitech All-in-One on.

  • High UV resistance
  • Quick drying
  • Withstands severe traffic
  • Ideal for extreme environments
  • Apply to wet or dry wood surfaces

Application

New wood surfaces
New wood surfaces have a hard shiny surface called mill glaze that prevents maximum penetration and bonding of any finish and this should be removed before starting application. Make up a solution of 1 part bleach to 3 parts water to this add Owatrol Prepdeck in the ratio of 1 part Owatrol Prepdeck to 4 parts bleach/water
solution except for IPE; for IPE add 1 part Owatrol Prepdeck to 1 part bleach/water solution. Apply Owatrol Prepdeck / bleach / water solution to the surface and leave to work for 20 minutes - If surface starts to dry, re-wet with the Owatrol Prepdeck / bleach / water solution. Scrub surface with stiff nylon brush, deck brush or use a power washer (500-1000 psi). Rinse wood thoroughly with copious amounts of fresh clean water.

Weathered wood surfaces (untreated)
Wood that has weathered longer than 6 months requires thorough cleaning. Make up a bleach/water solution in the ratio of 1 part bleach to 3 parts water. Dilute  Owatrol Prepdeck from a minimum of 1 part Owatrol Prepdeck to 5 parts bleach / water solution, up to a maximum of 1 part Owatrol Prepdeck to 20 parts bleach  / water solution; depending on condition of surface to be cleaned.

Apply Owatrol Prepdeck / bleach / water solution to the surface and leave to work for 20 minutes - If the surface starts to dry, re-wet with the Owatrol Prepdeck / bleach / water solution. Scrub surface with stiff nylon brush, deck brush or use a power washer (500-1000 psi). Rinse wood thoroughly with copious amounts of fresh clean water.

Surface and Environment

Owatrol Tropitech has been designed for use on all hardwoods, softwoods and pressure treated timber, and is ideal for use in extreme environments, externally and internally, being able to withstand conditions of high humidity and moisture. Tropitech can be applied to horizontal and vertical wood substrates.

Technical Details

Features

  • Ideal for extreme environments
  • Withstands severe traffic

Recommendations before use

  • Surfaces to be coated must be free of all dirt, grease, grime and previous coatings
  • New wood: the ideal time to finish new wood is 1 to 3 months after installation
  • All new wood surfaces should be treated with PREPDECK and used in accordance with the PREPDECK label instructions
  • Follow with pressure washer (max 50 bars) using fresh water. Note: If the wood darkens from the PREPDECK treatment (reaction to tanins), lighten with a chlorine bleach/water solution (1 part bleach to 3 parts water). Do not use any acid solution
  • Weathered wood surfaces (greyed or blackened) :
  • Treat with PREPDECK diluted up to a maximum of 1 part PREPDECK to 20 parts chlorine bleach/water solution (1 part bleach: 3 parts water), scrub in to surface and leave in accordance with PREPDECK label instructions.
  • Follow with pressure washer (max 50 bars) using fresh water
  • Previously coated wood surfaces : TROPITECH "All in One" can only be applied to bare wood surfaces
  • Remove all previous paint, stain, varnish or oil, thoroughly with PREPDECK per label instructions before proceeding
  • Some wood may darken from the PREPDECK treatment (reaction to tanins). If this occurs, lighten with a chlorine bleach/water solution (1 part bleach to 3 parts water). Do not use any acid solution
  • Let it stand for 15 minutes
  • Follow with pressure washer (max 50 bars) using fresh water.

Technical Info

Components: Single Pack
Type: Water Based
Finish: Matt Sheen
Stock Colours: Movingui, Redwood, Cedar, Sedona
Tintable: No
VOC Content: 41 g/l.
Volume Solids: -
Suitable Substrates: Wood
Where To Use:

Horizontal and vertical surfaces, Hardwoods, softwoods, pressure-treated timber or thermo-heated, Decks, docks, cladding, shingles and other exterior wood structures.

Restrictions: DO NOT use Net-trol or other acid based cleaners with Tropitech, except where stated.
Application Method: Brush, Roller, Paint Pad, Airless Spray 
Theoretical Coverage:

Weathered surfaces 3.5-6m2 per litre

New surfaces 8-11m2 per litre

Touch Dry: 1-2 hours at 23°C. Can be walked on once coating is touch-dry.
Overcoatable: As soon as previous coat is touch dry
Fully Cured: 24-48 hours after application of final coat
Cleaner / Thinner: Clean all tools and equipment with warm soapy water
Shelf Life: 2 years in original unopened container
Packaging: Available in 5 and 20 Litres

Related Products