Zinsser Bulls Eye 1-2-3 Interior/Exterior Adhesion Primer

SKU
id3308
Non Hazardous
An interior/exterior adhesion primer that can be applied to all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel, railings etc.
Available in 1L, 2.5L, 5L and 10 Litres in White
From £22.64 £18.87
In stock
Only %1 left
Product Description

Zinsser Bullseye 1-2-3 is an interior/exterior adhesion primer that can be applied to all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel and railings.

Zinsser Bullseye 1-2-3 is a water-based all-purpose primer used as a stain block paint on walls for prevention of water stains, graffiti and grease spots, to name a few. Bullseye 1-2-3 Mould and Mildew Paint offers excellent stain blocking qualities and high quality adhesion without the need for sanding.

BULLS-EYE 1-2-3 bonds to wood, plaster, concrete, gloss enamels, hardboard, galvanised steel, glass and tile. It also provides a rust inhibitive coating on iron railings, steel frames, piping, etc. Formulated to resist the growth of mould and mildew in damp, humid environments such as bathrooms and kitchens.

Best Uses

Zinsser Bullseye 1-2-3 Mould and Mildew Paint stops the growth of mould and mildew, making it ideal in kitchens, bathrooms and basements. Particularly, Bullseye 1-2-3 Mould and Mildew Paint should be used in areas of high humidity where stains and odours are regular occurrences. Mould and mildew commonly builds up in basements and bathrooms, on walls, where moisture and humidity is present in the air and Bullseye Stain Block Paint works to cover up and prevent this happening again in the future.

Application

Zinsser Bullseye 1-2-3 can be applied using brush, roller or airless spray and is available in 1 litre or 5 litre tubs. Bullseye has a coverage rate of 350-450 ft2 per gallon (0.95litres) and can be recoated after just 1 hour, giving it exceptional fast drying qualities. After use, Zinsser Bullseye 1-2-3 Mould and Mildew Stain Block Paint should be cleaned up with soapy water to provide you with a pleasing finish.

Surface and Environment

Zinsser Bullseye 1-2-3 Paint can be applied to all interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings and other paintable surfaces. Bullseye 1-2-3 Mould and Mildew Paint from Zinsser is ideal for use internally and externally, predominantly in areas exposed to high humidity in order to protect against mould and mildew, which can lead to unhealthy bacteria and infections.

Technical Details

Features

  • Fast drying, may be recoated in 1 hour
  • Adheres to glossy surfaces without pre-sanding or de-glossing
  • Rust inhibitive coating
  • Resists mould & mildew on primer film High pH resistance (up to 12.5)
  • Seals common graffiti stains Excellent enamel undercoat Compatible with oil or latex topcoats
  • Clean up with soapy water
  • Zinsser Bullseye 1-2-3 is a water-based all-purpose Primer
  • Bullseye offers excellent adhesion without sanding
  • Stops water stains, grease spots, resins tannins from cedar and redwood
  • Stops the growth of mould and mildew, making it ideal in kitchens, bathrooms and basements
  • Zinsser Bullseye 1-2-3 should be used in areas of high humidity.

Technical

Components: Single Pack
Type: Water Based
Finish: -
Stock Colours: White
Tintable: Yes. Please note, bespoke tints are non-refundable / exchangeable
VOC Content: less than 30g / litre
Volume Solids: 34.0%
Suitable Substrates: Wood, Plaster, Concrete, Gloss Enamels, Hardboard, Glass, Tile, Iron Railings, Steel.
Application Method: Brush, Roller
Theoretical Coverage: 10m2 per litre
Touch Dry: 35 minutes at 24°C
Overcoatable: 1 hour at 24°C
Fully Cured: 7 days at 24°C
Cleaner / Thinner: Ready to use - no dilution necessary. Clean tools with warm water and liquid detergent
Shelf Life: 2 years from date of production unopened or 'use by' date where specified
Packaging: Available in 1, 2.5, 5 and 10 Litres
Product Video

Related Products