Rustoleum Pegaprim Isofix Stain Block is a high opacity, fast drying universal adhesion primer based on solvent borne Shellac resins. Pegaprim Isofix provides good adhesion on metal, wood, timber and smooth hard surfaces and is ideal for Home and Garden Use.
Rustoleum Pegaprim Isofix Stain Block is best used for offering adhesion to metal and woods, internally and externally. Exterior uses of Pegaprim Isofix are strictly and exclusively limited for spot priming application as a sealer. Can be applied even at freezing temperatures. Pegaprim Isofix can also be used to seal porous substrates including, wood and plaster. Pegaprim Isofix Stain Block is a nicotine sealer.
Rustoleum Pegaprim Isofix Stain Block should be applied by brush, roller or spray and has an unbelievable drying time of 15 minutes. After 45 minutes you will be able to apply a second coat of Isofix. When this is dry you will be able to recoat will almost any decorative paint.
Rustoleum Pegaprim Isofix Stain Block provides good adhesion to metal surfaces (copper, bronze, stainless steel) and smooth hard substrates (old paint layers, Formica).
- Ideal for spot priming (tar, soot, graffiti, humidity)
- Blocks wood bleedings
- A nicotine sealer
- Can be used to seal porous substrates (wood, plaster, etc.)
- Very fast drying
- Masks odours
- Recoatable with most decorative paints
- Can be applied at freezing temperature.
|Type:||Ultra insulating and fast drying universal adhesion primer based on solvent borne Shellac resins|
|VOC Content:||480.0g per Litre|
|Suitable Substrates:||For Interior and Exterior use. Adhesion on metal (copper, bronze, stainless steel) and on smooth hard surfaces (old paint layers, Formica). Exterior uses of Pegaprim Isofix are strictly and exclusively limited for spot priming application as a sealer.|
|Application Method:||Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||30 microns|
|Touch Dry:||15 minutes at 20°C|
|Overcoatable:||After 45 minutes at 20°C|
|Fully Cured:||1 day at 20°C|
|Cleaner / Thinner:||Denaturised alcohol|
|Shelf Life:||3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.