Centrecoat Aquafloor Anti Slip Floor Paint

SKU
id10132
UN1263 (Class: 3, Pk Grp: III)
An anti slip floor paint containing a fine aggregate, offers ease of cleaning and low dirt retention.
Available in 5 Litres. Tintable to in many RAL and BS4800 colours
From £78.17 £65.14
In stock
Only %1 left
Product Description

Centrecoat Aquafloor Anti Slip floor coating is suitable for the swimming pool side apron, kitchens, patios and other areas requiring a slip resistant surface.

Aquafloor Anti Slip is low odour, water based, polyurethane floor coating. The polyurethane/acrylic binder system and Polytetrafluoroethylene (PTFE) formulation reduces dirt entrapment and provides an easily clean surface.

Best Uses

Aquafloor Anti Slip is best for utilisation in environments where Health and Safety concerns, regarding slips and falls, necessitates an anti slip surface. Due to its low odour nature, Aquafloor is also recommended for food production areas, eliminating the potential for food (odour) contamination.

Application

Aquafloor Anti Slip floor coating is ideal for areas where water pools on floors, for example areas around a swimming pool such as the apron and in kitchen, food and confectionery areas. Areas where safety is a prime consideration. As Aquafloor Anti Slip is water based, there is very little odour, making Aquafloor a versatile slip resistant floor paint which is ideal for confined areas or areas where contamination to foodstuffs is a concern.

The fine aggregate that is blended into Aquafloor Anti Slip has been selected as it offers a high degree of slip resistance but, due to its rounded surface nature, it does not cause discomfort to bare feet in swimming pool environments.

Surface and Environment

Aquafloor Anti Slip coating if for use on floor surfaces which require an anti slip finish and within areas, such as food production areas, where a low odour product is essential.

Technical Details

Technical Info

  • Store between 5-25 degrees celsius
  • Fine aggregate 
  • Slip-Resistant 
  • Two coat application
  • Contains PTFE
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: Broad range of colours available
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: -
Volume Solids: 60%
Suitable Substrates: Kitchens, Food preparation areas, garages, Industrial Walkways, Light mechanical areas, Concrete or Wooden areas
Application Method: Brush, Roller, Airless Spray or Air-Atomised Spray
Theoretical Coverage: 8-10 square meters per litre depending upon type of application
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Average Drying Time: 2 hours at 20°C @ 60%RH
Overcoatable: After 4-6 hours at 20°C
Fully Cured: 10 - 14 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 6 months in unopened containers
Packaging: Available in 5 Litres 

Related Products