CombiColor Multi-Surface 7300MS is a solvent based primer and topcoat in one and can be applied direct to wood, metal, MDF, masonry, tiles, most rigid plastics (including uPVC), old concrete, aged galvanized steel and more.
Rustoleum CombiColor Multi-Surface can be applied directly to a wide range of surfaces, acting as a primer and finish at the same time. The product is available in a range of standard colours in gloss finish and can also be tinted to a range of BS and RAL colours. Also available in satin and matt finishes in limited colours. Available in 2.5 litres.
With great adhesion properties, Rustoleum CombiColor Multi-Surface can be used to decorate and protect various substrates found internally and externally, including wood, metal, MDF, masonry, tiles and uPVC. Available in 19 different colours, this multi-surface paint is best used to provide a decorative finish in only one coat, without the hassle of having to buy a primer and a topcoat separately.
Applying Rustoleum CombiColor Multi-Surface Paint is incredibly easy. Using a brush or roller you will be able to achieve the desired finish, where the theoretical coverage is approximately 9m2 per litre based on 45 microns dry.
Once you have applied Rustoleum CombiColor Multi-Surface, your surface will be dry to touch after 4 hours in a room temperature of 20°C, and if you wish to add a second coat, this can be done after 16 hours if temperatures remain the same.
Surface and Environment
Rustoleum CombiColor Multi-Surface can be applied internally or externally to a vast range of surfaces, including concrete, wood, plastics, PVC, metal, galvanized steel and masonry.
Call our technical support team if you have any further questions, or if you would prefer to make an order over the phone please call 01462 421 333.
- 7300 MS is a one coat (Primer + Finish in one) maintenance paint, direct to many surfaces
- Application on many different substrates
- solvent based
- Direct to surface
- Primer & finish in one
- Great adhesion properties
- Theoretical coverage 9m2 per litre
- Interior and exterior
- Gloss finish available in range of standard colours.
- Satin and Matt finishes available in limited colours.
|Type:||Urethane modified alkyd|
|Finish:||Gloss, Matt and Satin|
|Stock Colours:||As above|
|Tintable:||Gloss is tintable. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||420.0g per Litre|
|Suitable Substrates:||For wood, metal, mdf, masonry, tiles, most rigid plastics, old concrete and more|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||9 - 10 m2 per litre at 45 microns dry depending on colour|
|Wet Film Thickness (WFT):||82 microns|
|Dry Film Thickness (DFT):||45 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.