£7.50 delivery on orders excluding certain products & postcodes *
Rustoleum 9700 ColdMax Rapid WG (Wintergrade) is a low temperature two component rapid curing polyaspartic coating which is designed for internal and external use and can be applied and cured in temperatures which are as low as minus 10°C.
Rustoleum 9700 ColdMax Rapid WG (Wintergrade) is ideal for use in external and cold environments, as it is a coating that cures, even in extreme conditions. Examples of areas for using the Rustoleum 9700 ColdMax Rapid WG (Wintergrade) are walkways, balconies, loading bays, warehouses and it is also highly suited for application in cold stores and walk-in fridges.
Rustoleum 9700 ColdMax Rapid WG (Wintergrade) can be applied using a brush or roller. In temperatures of around 20°C this product will dry in one and a half hours and, if applied to a floor, can be walked over after only four hours.
Rustoleum 9700 ColdMax Rapid WG (Wintergrade) can be applied directly to a range of porous surfaces which included brickwork, concrete, stone and wood without the need of a special primer. ColdMax Rapid 9700 offers resistance to UV light and chemicals, as well as being highly durable for foot traffic. When dry, Rustoleum ColdMax Rapid 9700 will achieve a gloss finish in either a dark grey, tile red, light grey or white finish.
Suitable for use on walkways, balconies, cold stores, walk-in fridges, loading bays and warehouses. Rustoleum 9700 ColdMax Rapid WG (Wintergrade) provides excellent protection against UV-radiation, chemicals and traffic. Suitable for application directly onto porous substrates, no special primer is required.
Components: | Two Part |
Type: | Solvent Based |
Finish: | Gloss |
Stock Colours: | RAL 7035, RAL 7001, White |
Tintable: | No |
VOC Content: | 93.0g per Litre |
Volume Solids: | 91 % (94 % transparent) |
Suitable Substrates: | For porous substrates; a special primer is not needed |
Application Method: | Brush, Roller |
Theoretical Coverage: | 10 m2 per litre |
Wet Film Thickness (WFT): | 100 microns |
Dry Film Thickness (DFT): | 90 - 95 microns |
Induction Time: | - |
Pot Life: | 60 minutes at 5°C |
Touch Dry: | 3 - 4 hours at 5°C |
Overcoatable: | After 4 - 5 hours at 20°C |
Fully Cured: | 1 day at 5°C |
Cleaner / Thinner: | Rustoleum Thinner 160 |
Shelf Life: | 1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 10° and 25°C |
Packaging: | Available in 2.5 Litres (2 Litres for Transparent) |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.