£7.50 delivery on orders excluding certain products & postcodes *
Mapei Eporip - 2 Part Adhesive Crack Repair and Cementitious Bonding
SKU
id10308
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
Available in 2 and 10 Kg in Grey
From
£36.89
£30.74
In stock
Product Description
Mapei Eporip is a two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
Eporip is a slightly thixotropic paste that can be applied to both horizontal and vertical surfaces for filling cracks in concrete, bonding steel to concrete, bonding precast concrete elements or for monolithic construction joints between fresh and hardened concrete.
Mapei Eporip polymerises without shrinkage and, after curing, is waterproof, possesses excellent dielectric properties and high mechanical characteristics in addition to its ability to bond concrete and steel.
Best Uses
Mapei Eporip is suitable for use for construction joints for the structural reinforcement of beams and pillars, decayed industrial flooring, rigid waterproof constructions joints, or for sealing cracks in cement screeds.
Consumption
Construction joints with a rough substrate 0.5-0.7 kg/m2. Construction joints with a very uneven substrate 1.0-2.0 kg/m2. Sealing cracks 1.35 kg/l per litre of cavity. Actual consumption depends on irregularities within the substrate and the method used in application.
Application
Thoroughly mix the two components of Mapei Eporip and apply to dry or slightly damp concrete using a paint brush or trowel immediately after mixing.
Technical Details
- Eporip is a two component solvent-free epoxy adhesive
- Suitable for application to horizontal and vertical surfaces
- Bonds steel to concrete
- Suitable for filling cracks in concrete
- Do not apply Eporip at temperatures lower than +5 degrees C.
- Do not use Eporip on wet surfaces (even though they can be slightly damp)
- Do not cast fresh concrete onto hardened Eporip
- Do not use Eporip on dusty, crumbling or loose surfaces
- Supplied in 2 Kg and 10 Kg kits.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.