Rustoleum 8300 Hygienic Wall Coating Cold-Store Paint

SKU
ID1120
UN1263 (Class: 3, Pk Grp: III)
Designed for Walls and Ceilings and should ideally be applied over 8399 masonry sealer.
Available in 5 Litres
From £124.07 £103.39
In stock
Only %1 left
Product Description

Rustoleum Mathys 8300 Hygienic Topcoat is a mould resistant paint containing anti-fungal additives. A Single pack hygienic topcoat that protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture.

Rustoleum Cold Store Paint are fast drying and non yellowing which is an ideal product for use in cold stores. Rustoleum Mould Resistant 8300 is based on vinyl acrylics with non leaching fungicides.

Best Uses

This Cold Store Paint is ideal for use in refrigerated areas, and offers quick drying time even in temperatures below freezing.

Rustoleum 8300 Cold Store Paint Topcoat should be applied on mineral substrates primed with Rustoleum Primer 8399. This product resists mild chemical exposure, occasional product spillage, requent chemical cleaning, intermittent high humidity and moisture. Can be applied on 8399 or well prepared previous coatings.

Rustoleum 8300 is classified Class 1 Surface Spread of Flame according to BS 476; part 7 : 1987.

Application

New concrete, plastered or brick surfaces should cure and dry for at least 30 days prior to the application of coatings. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning. Wash total surface with plenty of fresh/warm water or high pressure (steam) cleaning in order to remove all remnants of contamination and cleaners
Rustoleum ND14 or Rustoleum FK111. Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly. Remove non-adhering old coatings. The surface must be clean and dry during application.

Surface/Environment

Rustoleum 8300 Cold Store Paint is designed for use on walls and ceilings and can be used on a variety of different surfaces, including masonry, plaster and concrete. The Food and Beverage industries are ideal places in which to use this Paint as they often contain refrigerated conditions with low temperatures. If you have any questions regarding this product please do not hesitate in contacting our technical support team for extra help.

Technical Details

Features

  • A hygiene coating developed for use on walls and ceilings
  • Can be applied as low as -10°C
  • Rustoleum Mathys 8300 is based on vinyl acrylics with non-leaching fungicides
  • Fast drying, fast recoatable
  • Non yellowing
  • Apply over 8399 masonry sealer
  • Ideal for use in cold-stores
  • Ideal on masonry, plaster or concrete for the food and beverage industries

Technical Info

Components: One Part
Type: Single pack hygienic topcoat
Finish: Gloss
Stock Colours: RAL 9010
Tintable: Yes, minimum order quantity 150 Litres. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 458.0g per Litre
Volume Solids: 42%
Suitable Substrates: Should be applied on mineral substrates primed with Rust-Oleum Primer 8399
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 12 m2 per litre
Wet Film Thickness (WFT): 85 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours (20°C), 4 hours (10°C), 30 minutes (30°C), 6 hours (0°C), 8 hours (-10°C)
Overcoatable: After 6 hours (20°C), 12 hours (10°C), 2 hours (30°C), 16
hours (0°C), 24 hours (-10°C)
Fully Cured: 8 days (20°C), 12 days (10°C), 5 days (30°C)
Cleaner / Thinner: Rustoleum Thinner 160
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 5 Litres

Related Products