Please note the manufacturer is expecting a 3-5 working day turn around on this product.
Coo-Var Guard-Coat Anti-Microbial Floor and Wall Paint is a tough, hygienic coating that inhibits the growth of micro organisms such as bacteria and germs using silver ion technology.
Guarding against the spread of bacteria including MRDS and E.Coli for the life of the paint, this coating is not only suitable for walls but also floors with the added benefit of being easy to clean. As a 2 pack system, this paint is incredibly hard wearing withstanding chair and trolley knocks.
Coo-Var Guard-Coat can be used over stable existing paint coverings on wood, concrete, masonry, asphalt and tarmac.Hospitals, clinics, kitchens, catering establishments, public buildings, schools, factories, care homes, residential centres, prisons, hotels, leisure centres, vets and much more.
Prior to use, Coo-Var 2 Pack High Performance Primer and / or Dampshield can be used. Coo-Var Guard-Coat should be diluted with 500ml of clean water per 5kg pack. Do not apply at temperatures below 10°C. All surfaces should be clean, dry, sound and free from contaminants.
Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate.
Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
|Stock Colours:||Tile Red, Grey, Green, Safety Yellow, Safety Red, Black, White, Clear|
|Tintable:||Yes, on request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||10.0g per Litre|
|Volume Solids:||55 - 85%|
|Suitable Substrates:||For floors and walls (including heavy foot or vehicle traffic)|
|Application Method:||Brush, Short Pile Roller|
|Theoretical Coverage:||6 - 10 m2 per Kg|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||35 - 70 microns|
|Pot Life:||2 - 4 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.